Have you decided to part with your RV? Before selling,be sure you check to see if your luxury vehicle’s water pump is creating a hammering sound lately.A noisy pump with chattering pipes and deep vibrations are some of the common problems faced by RV-ers. Putting your used rig up for sale without doing anything about the noise will keep customers away. Who wants to bear with that deafening sound after investing a substantial amount in a motor home?Here is how you can quiet before putting it up for sale:

Sell Your RV

  • You will find pump silencer kits available in RV supply stores. You can connect them to your vehicle’s water pump to reduce the noise level. Sometimes, these tools are so effective that they get rid of the hammering sound completely. The soft supply hosepipes inside the kit will help in reducing the vibrations that are transmitted to the solid supply lines.
  • In case you are not happy with noise even after the installation of the silencer kit, mark out the water lines that are emerging out of the pressure side of the water pump. If you find that any of the lines are next to a cabinet or a wall, consider adding foam pipe insulation to the pipe to reduce the vibration level.
  • If the noise persists, you can attach a water accumulator pump tank to the pump. It will minimize the degree of noise. Alternatively, you can replace the existing water pump with a variable speed pump to cushion the vibration and jack hammering. It will not be necessary to replace the pump though, unless the noise is deafening, which is a rare scenario.

Once you have repaired your noisy RV water pump, you can sell your motor home at a good price. We can assist you with the deal and ensure that you get the best return. who are looking for a used rig.

We often hear stories of people who want to sell their RVs without thoroughly inspecting it. It is extremely important to take a good look at all parts of your RV, because your buyer is less likely to miss anything that does not function well. One thing that sealant which prevents the roof vents from possible leakage. Unequal temperatures, heavy downpour, and the sun’s scorching heat may damage the material over the years and take a toll on your vehicle. If you find water trickling through the skylight, it’s time to reseal to prevent leaks. Here are a few useful tips to help you get the job done before you sell your RV:

Sell Your RV

Go Through the Owners Manual

Check the user manual to understand whether the vehicle’s roof can support human weight. If it cannot, put a ladder near the side of the roof so that you can easily climb and work on the damaged sealant without bending too much.

Remove the Caulk

Take a putty knife to remove the sealing caulk around the RV skylight. Do it carefully without using pressure. However, ensure that you do not end up applying too much force as that will damage the rivets or screws that secure the skylight in its place.

Get Rid of Any Residue from the Existing Caulk

Take a bottle of mineral spirits or paint thinner and pour the solvent onto a soft cloth or brush to remove any residue from the caulk. With a cleaner skylight, you can rest assure that the replacement filler will be able to better hold onto the skylight.

Place the Roofing Cement Tube Carefully

Make sure you put the roofing cement tube into the caulk gun. Check whether the sharp nozzle is not close to the trigger and that it is facing away. Cut off the nozzle tip with a small quick stroke with a sharp knife or pair of scissors.

Cover the Gaps

Take an even ring of caulk and place it carefully around the joint where the plastic or metal rims meet the vehicle roof. There is no need to apply a constant force on the caulk gun. Instead, press the trigger applying uniform pressure until the time it can’t be pressed anymore. Your job is complete when the caulk covers all the gaps completely, leaving no possibilities of leakage.

Now that you know how to reseal your damaged RV skylight, it’s time to put your motor home up for sale. If you need any assistance or .