Your rig is not meant to sit idle; it’s a rugged vehicle which is designed for extensive outdoor use. Although specially treated for enduring the sun’s UV rays and rain, constant exposure to direct sunlight may take a toll on its beauty, subsequently taking away much of its sheen. If you have a plan to , you should start working toward restoring some of the lost shine to its faded exterior. The following products will help you in your efforts:

Sell Your RV

Cleaning:

Instead of using those detergent-based items, always use those products that are made to serve the dual purpose of cleaning and protecting. These products contain wax that helps protect your RV’s finish and are ideal for RVs with a fiberglass exterior.

Polishing:

After the wash, apply a coat of polish. Use those items only that come with UV protection features. This will help prevent chalky buildup on the RV exterior. Remember, this product is not meant for frequent use. Use them only once in a while.

Beautifying:

Is the roof of your RV made of rubber membrane? If yes, you might have noticed your roof getting slowly enveloped by a layer of chalky film. Rain washes down these powdery substances, and they slide down the outer walls of the RV, finally settling down on its surface. Over time, they will fill up the outer walls of your RV with the ugly streak like strains. Use a rubber roof cleaner to get rid of this chalky buildup. Next, use a streak remover to clean off the unsightly stain marks.

When it’s finally time to present your rig before a prospective buyer, polish it with a high-quality oxidation remover. Then apply a few coat of color restorer. This is going to remove the last trace of that chalky look. This step will bring extra shine to your RV.

When you are out in the market for selling a dated rig, you should take the first impression very seriously. Nothing puts off a prospective buyer more than a unit with an unimpressive look and feel. A glossy exterior, on the other hand, helps to form a favorable impression on your customers’ minds. You can easily do that with a thoughtful use of the above-mentioned products. If you are in need for further assistance in selling your RV, .

No matter how seasoned a driver you are, a crack in one of your RV windows is something that you can hardly avoid. You could have been driving too close to a tree with protruding branches while maneuvering the vehicle through a wooded area. Or maybe you parked your luxury rig in the backyard and you RV window became the poor victim of your kid’s baseball ‘skills.’However, when you are planning to sell your RV, a cracked window glass will reduce the selling price of your vehicle. So, here are a few before you put it up for sale:

Selling RV

Start by Removing the Interior Screws

Start by removing the interior screws and window frame. Make sure you have a family member or a friend outside the vehicle to hold the window so that it does not fall out. Ask the person outside to use a putty knife to force open the frame. It should be done carefully to break or segregate the seal between the window and the putty. Once the window breaks loose, you can remove it and keep it aside.

Clean the Window Opening

You will have to clean the window slot to prevent water leaking into the vehicle causing further damage. While installing a new window, seal it properly and get rid of the old putty for a perfect installation.

Seal Tightly Around the Window Slot

Install a new layer of putty around the window, and if your RV has a fiberglass siding with a smooth surface, you will just need to apply a single layer of butyl putty tape. But with an aluminum siding with a rough surface, two layers are essential for ensuring a tight and secure seal.

Install the New Window

Once you are through with the sealing, set up the new window into the slot and press it gently down the frame. While your helper holds the window from outside, you get inside the vehicle and secure the screws in the inner frame ring. It’s the inside ring that keeps the window in its right place. Tighten all the screws, but do not overdo it else the frame or one of the screws may snap. To ensure that there is no water leakage,apply some silicone on the top rim of the external window frame. Run it around the corner and along the sides about three to four inches.

Replacing a broken window with a new one all by yourself will save you the labor cost of a repair professional. With a new installation, it’s easy to attract buyers and sell your RV at a reasonable price. And if you right away.

When you are out in the market to sell your RV, a buyer would not like to see water entering the vehicle through the damaged slide-out seals. But that’s what is going to happen if you ignore leakage issues. The rubber seals may crack over time, deteriorate, and fail to prevent water leakage inside your home-on-wheels. Leaving this problem unattended would permanently damage your RV, reducing its resale value. Here are a few tips to from the slide-out seals:

Sell Your RV

Ensure that Your RV Is Level

Check whether your RV is level or not. If not, water could bypass a damaged slide-out seal and enter your vehicle, causing damage. And this is not something you want your buyer to see when s(he) pays a visit for a personal inspection of your RV.

Check for Cracks or Dry Rotting

Check whether the slide-out seal is broken, cracked, or damaged because of dry rotting. The sun’s ultraviolet rays damage a rubber seal and reduce its ability to prevent the entry of water. If you find that these seals have become too brittle or developed gaps, they will need to be replaced right away.

Use Quality Lubricants to Prevent Cracking

Rubber seals are used to prevent road splash or raindrops from intruding the sides, top, or bottom of your vehicle’s slide-outs. Therefore, use first-rate seal lubricants to prevent them from becoming dry and brittle. Choose a mineral oil based lubricant to reduce the possibilities of damage. Apply the seal conditioner after cleaning the rubber first, as that would get rid of any dirt, dust or debris that has collected over the years. Make sure that you use slide-out seal conditioners at least once in a couple of months to keep the seals in good condition and prevent premature cracking. Apply the lubricant to all sides of the seal including the underside. You will need to peel the rubber seal back to reach the underside.

Simply remember these useful tips to maintain your RV’s rubber slide-out seals. It will help you prevent leakage problems in your motor home. And if you want any assistance to sell your used RV at a competitive price, .